The so-called thermoreactors with regenerative exhaust air heat exchangers clean lightly loaded exhaust gas flows. Heat recovery up to 95% or higher help achieve the lowest fuel consumption even with large quantities of exhaust air.

Ceramic storage masses and high temperature liners in the reactor chambers ensure long service life. The combination of catalysts with regenerative pre-warming of the exhaust air creates a very compact system that works autothermally at even smaller solvent concentrations.

Adsorber wheels / rotor concentrators are used to clean large exhaust gas flows with low VOC concentrations and to save investment as well as operation costs due to a reduced gas volume.

Heat exchanger bundles are designed to utilize the waste heat for different processes. The pictures shows a double bundle tube heat exchanger (left) and arrangement of heat exchangers for cupola blast air preheating process (right).

The ENETEX burner is a special innovation for TOS and COS systems and air heaters. The oxygen required for combustion is taken directly from the preheated exhaust gas or from the process air before heating. The temperature-resistant design and special formation of the fuel lance and burner basket are responsible for the long service life of our burners. The special type of air distribution (staged combustion) guarantees the best possible burn rate, good blending, and low NOx emissions.

Typical applications for hot gas filter is in gases in which standard filters like bag filters can´t be used due to the high temperature. The cartridges of hot gas filters consist of temperature resistant ceramic fibers. The dust removal from the surface of the filter elements occures by pressurized air impulses and the dust will be transported out of the system by screw conveyor.

The awareness of economical handling of energy increases world wide. This results in an increasing demand in heat or cooling insulating materials for industrial plants and buildings as e.g. mineral wool. ENETEX engineers and manufactures components from raw material handling, cupola, spinner, drum, pendulum, curing oven, saws and packing as well as complete turnkey production lines for mineral wool. The waste gases from cupola and curing oven will be cleaned that they can be led into atmosphere without danger for the environment.

Production unit for mineral wool
- handling dosing of raw materials
- cupola with preheating of the blast air and cleaning of the gases
- spinner and binder handling
- collection drum
- pendulum and forming
- crimping
- curing oven
- saws
- packing

Different kind of smelling organic components are formed during the coffee roasting process. Special catalysts are used to oxidise the organics at a lower temperature level starting at 370°C. The special cartridge design enables easy maintenance or exchange of the catalyst.